Omron CL-MIT Elite Large cuff Instrucciones De Uso página 2

CL-MIT Elite Large cuff
Instructions for use
1.
2.
2
Thank you for purchasing the OMRON CL-MIT Elite
Large Cuff. Arm circumference for this cuff is 32 to
42 centimeters. This Large Cuff can be connected
to OMRON "MIT Elite Plus" and "MIT Elite" Upper
Arm Blood Pressure Monitor. Please refer to the
original instruction manual of your Blood Pressure
Monitor.
Taking measurements on the left arm
1. Put your left arm through the cuff loop.
Note: If the cuff is not assembled, pass the end
of the cuff furthest from the tubing through
the metal D-ring to form a loop. The smooth
cloth should be on the inside of the cuff loop.
2. Position the arm correctly.
1) The air tube should run down the inside of your
forearm and be in line with your middle fi nger.
2) The bottom of the cuff should be approximately
1 to 2 cm above your elbow.
3) Apply the cuff to your upper arm so that the
coloured marker (blue arrow under tube) is
centered on the middle of your inner arm and
points down the inside of the arm.