Lenco SPR-070 Manual Del Usuario página 7

Bluetooth:
1. Switch on the unit by long pressing the power On/Off button (10). The button
will light up in blue. A message "the Bluetooth device is ready to pair" will
sound.
2. Activate the Bluetooth of your mobile phone and scan for Bluetooth devices,
select the device named "Lenco SPR-070" and connect to it. If the connection is
successfully made, the blue power button light will stop flashing and you will
hear "the Bluetooth Device is Connected Successfully".
3. Now you can play music from your mobile phone/tablet/computer
4. Long press the + (6) or - (5) button on the device to change to another music
track.
5. Press the Play/Pause button (7) on the device to Play/Pause the music.
6. Short press the + (6) or - (5) button to adjust the volume up and down. (Or
adjust the mobile phones' volume).
"This product has a Bluetooth reception function, you can't transmit any Bluetooth sound with it:
this means that you can receive a Bluetooth sound signal from an external source like a
smartphone."
Playing music from Micro SD (TF) memory card or USB memory stick
1. Long press the Power button (10) to switch the unit on (if not already on).
2. Insert a Micro SD (TF) card (1) or USB memory stick (2) on the back of the unit.
The speaker will say "SD card" when a micro SD card is inserted or "USB" when a
USB memory stick is inserted. The music will start automatically.
3. When playing music, long press the + (6) or – (5) button to go to the
next/previous song. Short press the + (6) or – (5) button to adjust the volume up
or down.
4. Press Play/Pause (7) to play/pause the current music track.
NOTE: if a SD (TF) CARD or USB memory stick is inserted when Bluetooth mode is
active and playing music, Bluetooth mode will exit and switches to the USB or Micro
SD card play mode. You can press the MODE button (8) to switch back to Bluetooth
mode again.
FM Radio:
1. Multiple Press the mode button (8) until you hear "Radio mode".
2. Now you can long press the Play/Pause button (7) to start an automatic channel
search with automatic store.
3. When the automatic search is done, you can switch the found channels by
pressing the + (6) or – (5) buttons.
Note: if your favorite radio station can't be received or reception is with noise
You can rotate the SPR-070 unit to change the reception quality. (The SPR-070 has
an internal antenna). You can also use the supplied 3.5mm jack cable as an extra
antenna. Insert it into the aux port and alter the cable position for better
reception.
7