BESAFE iZi Turn i-Size Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
6
10
7
7
14
8
9
11
12
13
2x
8
Thank you for choosing BeSafe iZi Turn i-Size
!
It is important that you read this user manual BEFORE
installing your seat. Incorrect installation could endanger
your child.
! Vital information
• The child seat MUST NOT be installed in a front
passenger seat WITH AN ACTIVATED AIRBAG.
• This seat can only be installed in a car equipped with
ISOfix anchorage points.
• For the suitable positions in the car, read the vehicle handbook.
• Read the car list to find out whether your car model is approved for
this seat. The latest update of the carlist can be found on the BeSafe
website www.besafe.com. If your car is not present in the carlist,
please contact BeSafe for further information.
• iZi Turn i-Size is approved rear facing for children with a stature
height from 61 to 105 cm, with a maximum weight up to 18 kg and
forward facing for children with a stature height from 88 to 105 cm
with a maximum weight up to 18 kg.
• Important: Do not use forward facing before the child is over
15 months.
• When driving with a child sitting in the seat, the seat must always be
in the (rear facing) driving direction of the vehicle. Never drive with
the seat rotated to the side when a child is sitting in the seat.
It is recommended not to drive with the seat rotated to the side when
the seat is empty.
• BeSafe recommends to use the seat for as long as possible in the
rear facing position.
• The harness straps must always be locked when the child is in
the seat.
• The harness straps must be tightened without slack and not twisted.
• The shoulder pads contain magnets. Magnets can influence
electronic equipment such as pacemakers.
• Protect any part of the child's body which is exposed to the sun.
• The floor support must always be used. Make sure that the floor
support is fully pushed down until it touches the floor of the vehicle
in front of the seat and that the seat is positioned horizontal in the
vehicle with the spirit level in the middle. The indicators of the floor
support should always show green.
• We recommend that this seat is used only for children who can sit
9
upright, usually not younger than 6 months.
• Remove the seat cushion when the child is over 2 years.
• Remove the side support when the child is over 2 years or earlier
when the child does not fit between these side supports anymore.
• After an accident, the seat must be replaced. Although it may look
undamaged, if you were to have another accident, the seat may not
be able to protect your child to the level to which it was designed.
• Prevent the seat from becoming trapped or weighed down by
luggage, seats and/or slamming doors.
• Make sure to tighten the harness extremely well, so that you can no
longer make a fold in the belts. When you tighten the harness, make
sure that the child is positioned well against the backrest.
• DO NOT attempt to dismantle, modify or add any part to the seat.
Warranty will be void if non-original parts or accessories are used.
• Never leave your child unattended in the seat.
• Make sure all passengers are informed about how to release your
child in case of emergency.
• Make sure luggage or other objects are properly secured. Unsecured
luggage may cause severe injuries to children and adults in case
of accidents.
• Never use the seat without the cover. The cover is a safety feature
and may only be replaced by an original BeSafe cover.
• Do not use any aggressive cleaning products; these may harm the
construction material of the seat.
• BeSafe advises that child seats should not be bought or sold
second-hand.
• KEEP this user manual for later use with the seat.
• DO NOT use the seat for longer than 7 years. Due to ageing, the
quality of the material may change.
• DO NOT use at home. It has not been designed for home use and can
only be used in a vehicle.
• When the child seat is mounted in the car check all the areas where
the child seat might touch the interior. We recommend using a
(BeSafe) protection cover in these places to avoid cuts, marks or
discolouration to the interior of the vehicle, especially in vehicles with
leather or wooden interiors.
• If in doubt, consult either the car seat manufacturer or the retailer.

Publicidad

Tabla de contenido
loading

Tabla de contenido