Description Of The Units - Reer BabyCam XL Instrucciones De Uso

Description of the units

1. Fully charge the battery before using the parent unit for the first time,
until the battery level indicator on the display shows a full charge.
2. Connect the camera using the mains adapter supplied.
3. Place the camera on a stable table or mount it on a wall.
4. Turn the camera on using the On/Off button (1). The power indicator
(2) lights up green.
5. Switch on the display by setting the switch (25) to | or
light (15) now remains constantly green. In
a vibration as soon as the device records a noise, in | mode, there will
be no vibration.
6. The devices are pre-coupled in the factory, enabling you see the ca-
mera's picture on the screen and hear the sound picked up by the
microphone through its speaker. If this is not the case, please proceed
with the steps described under Adding/deleting additional cameras.
The status
mode, you will receive