Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly - Preparing the Seat Unit
1.
Firstly, locate the seat
unit support.
Assembly - Attaching Seat Unit to Pram
1.
Align the seat unit
adapters with the cor-
responding holders on
the pram frame
08
2. Align either side of the
support with the two holes
situatied on both sides of
the inner seat frame.
Ensure that the support
is facing downwards and
towards the lower end of
the seat frame.
2. Push the seat unit
downwards until both
sides 'Click'. Ensure that
the seat is securely fas-
tened before use.
v.02.20
3.
Push the support into
the holes and secure in
place with the two push
press clips located on
the seat unit fabric.
3.
To remove the seat
unit, press the release
buttons on both sides
of the seat frame and
lift the seat upwards.
Publicidad
