Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Operating Instructions
1. Connect the DMX controlling line, open the base of the fixture, and remove the oil tank to add
fluid,carefully not to exceed the mark on the tank to prevent oil from spilling out, and then press
the cap down and check tightly, finally place the oil tank back carefu lly and cover it.
2. If you need to use fixture upside down, just put machine upside down and remove the tank, put
the tank upside down and then re-inserted into the base.
3. Plug in the power cord, turn on the power switch, then oil bottles displaying in red is in heating,
set address code, waiting for about seven minutes, when the machine is well heated, oil bottles
will be displayed in blue, the LCD display can also be observed to understand the heating state of
the machine.
4.
Promote push rod of the console, the machine will begin to spray, the pump may emit shaking
sound in the first smoke slowly, which is a normal phenomenon.
5. Different ways of using several pieces together. picture one: using build/in bottle; Picture
MK 1600 LED
- 2 -
User Manual/Manual de Uso
Publicidad
