Utilitech Pro 6155W-PIR22 Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
1. Turn OFF power to work area at main circuit breaker or fuse
box.
CAUTION: Do not rely on wall switch alone to turn off power.
2. Remove the crossbar from the fixture by unscrewing the
pre-assembled mounting screw.
3. Attach crossbar to junction box (not included)
with the two crossbar screws (AA).
Hardware Used
Crossbar Screw
AA
4. Connect ground wire from the outlet box to the ground wire
from the light (A) by twisting a wire nut (BB) onto bare ends of
the wires. Connect white wire from the outlet box to the white
wire from the light (A) by twisting a wire nut (BB) onto bare
ends of the wires.
the black wire from the light (A) by twisting a wire nut (BB) onto
the bare ends of the wires.
Note: The ground wire is green.
Hardware Used
BB Wire Nut
2
x
Connect the black wire from the outlet box to
x 3
4
1
2
3
4