aflamo AV-WM42FLA Manual De Usuario página 6

Glass Stand Installation
A
X5
Remove the front glass (see "front glass removal / installation" section).
A.
B. Place appliance on a soft clean surface.
C. Remove the four screws from the bottom of the appliance (Fig. 3-3). Set screws aside.
D. Align the center stand piece to the bottom holes and secure it into the appliance using the screws
previously removed in step C (Fig. 3-4).
E. Prepare the glass base, ensuring that the rubber feet of the glass base are facing away of the
appliance.
F. Secure the glass base into the center piece using 5 screws (supplied) (Fig. 3-5).
G. Check if the glass stand is secured properly. Ensure appliance is standing straight and still (Fig. 3-6).
Install media (see "finishing" section).
H.
I. Reinstall the front glass.
K
X1
Fig. 3-3
Fig. 3-5
www.aflamo.com
J
X1
Fig. 3-4
Fig. 3-6
6