Technical Characteristics; Using The Torque Wrench - Anthogyr TORQ CONTROL Manual De Instrucciones

In the event of visible malfunction or damage, immediately stop using the instrument and
inform your approved distributor or the manufacturer.
In the event of any questions on the equipment, contact either your approved distributor or
the manufacturer.
References
Weight (g)
Input power
Tool type according to NF EN ISO 1797-1
Diameter of tools (mm) according to NF EN ISO 1797-1
Head height (mm)
Head angulation (°)
Maximum total length of the tool
Precision (N.cm)
* Approximate values: In the event of the use of rotational instruments which are longer in diameter, the user is responsible
for the appropriate choice of operating conditions which will prevent any risk to the patient or to another person.
Table of the torque value according to Anthogyr prosthetic parts *
In general :
M2 covering screw
M2 healing screw
M2 prosthetic screw (gold, titanium)
M2 gingival abutment (gold, titanium)
M1,4 prosthetic screw on abutment (gold, titanium)
M1,6 prosthetic screw (titanium)
All the values are indicative
In choosing the torque, follow the recommendations of the implant manufacturers.
The torque wrench is supplied unlubricated and unsterilised. Before first using it, the torque
wrench must be lubricated and sterilised. (See "Hygiene and maintenance" §.).
Before use, check that the torque wrench is not damaged and no part of it is
missing.
11
IV.

TECHNICAL CHARACTERISTICS

(mm) *
10
4
4
4
V.

USING THE TORQUE WRENCH

15500
130
Manual
Type 1
2.35
11.39
100
34
+/- 1
15 20 25 30
4 4
4
4 4
4
4
32 35
4 4
4 4
4