Lenco PIR-510 Manual Del Usuario página 19

Timer
Scheduled Playing
Language
Dimmer
Display
Power Management
Sleep Timer
Internet Radio
Weather
Repeat the above steps to setup the alarm 2
Important notice: when using the PIR-510 in Battery mode, you may set the
alarm, but the alarm symbols will not appear on the display meaning the
alarm will not trigger as long as the unit is NOT connected to the mains
power. If you connect the mains power, the symbols will show and the
configured alarm will trigger.
Setting the NAP alarm
- Press 'Alarm' button
- Select NAP alarm
- Use the up/down buttons to choose the desired minutes You can choose
5/10/20/30/60/90 or 120 minutes and then press the 'ok' button to
select
- Press the left arrow button to return to the main screen
When the NAP alarm is activated you see a clock icon on the lower right corner
with the remaining time.
Countdown timer (max. 100min)
Allow you to set a time for when the device switches on
⚫
Turn On
Select Repeat: Everyday, Once or Mon to Sun
Select Time: HH to HH
Select Sound: Internet Radio,FM,DAB/DAB+
⚫
Turn Off
English/Deutsch/Espanol/Francais/Portugese/Nederlands/Italiano/Pyccknn/
Svenska/Norsk bokmal/Dansk/magyar/Cesky/Slovensky/Polski/Turkce/Suomi
Power Saving/Turn On
Color/Monochrome
This option configures when the PIR-510 should go into standby mode. You
can select Turn off/5 minutes/15 minutes/30 minutes.
When configured, the PIR-510
for the configured time.
Use the Turn off setting to ignore the standby function.
Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes.Once
the time is set,there will be a bed icon with the remaining minutes at the top
right corner of the display and the device will turn to standby after the
configured time.
⚫
Buffer: configure the buffer time of the music playback 2/4/8 Seconds
⚫
Sound Quality: High or Low
Activate/deactivate the weather forecast on the standby display. Choose
your preferred temperature unit (°F or °C) and then proceed by entering your
location. When activated, the weather forecast is shown in turns with the
clock display on the standby screen (it changes every 10 secs).
will switch to standby when no music is played
19