Using Midi For Computer Control - Pioneer SEP-C1 Manual De Instrucciones

USING DJ SOFTWARE
For DJS:
Control can be performed while viewing the center display's
BROWSE, EFFECT, and MIX screens. For details of actual
operation, consult the chapter on "Manipulator Style"
operation of the SEP-C1 DJS Control Guide (PDF file on
accessory CD-ROM).
MEMO
• While the UTILITY screen is being displayed on the center
display, the center display's buttons and rotary selector dial
cannot be used to control DJ software.

USING MIDI FOR COMPUTER CONTROL

MIDI (Musical Instrument Digital Interface) is a standardized
protocol used to govern data transmission between electronic
musical instruments and computers.
The SEP-C1 uses the MIDI message format to output its operating
data and status to a computer connected by USB cable. By using
a DJ software program with USB MIDI support to assign the MIDI
messages output by the SEP-C1, the SEP-C1 can be used to
control the DJ software.
For more information regarding messages output by the SEP-C1,
consult the section "MIDI MESSAGE TABLE" (P. 23).
1 Connect to the computer.
The center display will show the [PRO DJ] logo.
2 Start the DJ software program.
When communication is established with the DJ program, the
SEP-C1 operates as a MIDI controller, and the status of
controller A/B and center display section's buttons and
controls are output as MIDI messages.
MEMO
• While the UTILITY screen is being displayed on the center
display, the center display's MIDI messages are not output.
22
En
All manuals and user guides at all-guides.com
 Setting a MIDI channel
MIDI channel setting can be performed from the UTILITY screen.
1 Press the UTILITY button.
2 Press the [PC] function button.
The center display will show the MIDI channel setting menu.
• Controller A uses the same channel as the center display,
while controller B uses a different channel. (Factory defaults
are for Controller A and center display to be set to Channel
1, and Controller B set to Channel 2).
3 Either press the rotary selector dial, or press the select down
() button.
The icon will move to the right.
4 Turn the rotary selector dial to change the value.
Values between 1 and 16 can be set.
5 Press the rotary selector dial to confirm the value selected.
• Press the select up () button to cancel the selection and
return to the UTILITY screen.