Shutting Down - Urmet 201071/8 Manual Del Usuario

5 . STARTING AND
PROGRAMMING
Power the IPerHome server after connecting.
The server should boot up automatically.
Mains
Check that the red LED is on.
Proceed as shown in the IPerWiz Technical Manual
for instructions on how to program from a PC.
16

6 . SHUTTING DOWN

Unplug the server to shut it down.
7. CAUTIONS
Always connect the IPerHome 201071/8 server to
IPerBus and to the alarm system before powering
it up.
The server will not be able to work correctly
otherwise.
The time shown on IPerHome may be incorrect if the
device is not connected to the Internet.
DS1071-042