Shutting Down - Urmet 1071/3 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

5. STARTING AND PROGRAMMING
Establish all connections properly before powering
the IPerHome Basic server.
The server should boot up automatically.
1
2
Check that the red LED is on.
Proceed as shown in the IPerWiz Technical Manual
for instructions on how to program from a PC.
20

6. SHUTTING DOWN

Unplug the server to shut it down.
7. CAUTIONS
Always connect the 1071/3 server to IPerBus and to
the alarm system before powering it up.
The server will not be able to work correctly
otherwise.
The time shown on IPerHome may be incorrect if
the device is not connected to the Internet.
DS1071-028

Publicidad

Tabla de contenido
loading

Tabla de contenido