Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK CONFIGURATION GUIDE DT-421D
3. NAVIGATION AND EDITION OF VALUES
3.1
Control Module
The DT-800 control module configures the DT-421D module:
1.-
After assembling and connecting, turn on the DT-800. After
scanning, check that appears the DT-421D module on the list on
the screen.
2.-
Press ENTER
access password (password by default "2008"). If the password is
right you will access to the configuration menu.
3.-
Use RIGHT
finding the DT-421D. The LED "Program" of the DT-421D
module should be flickering when the module appears on screen.
4.-
Press ENTER
DT-421D.
For more information, refer to the manual supplied with the DT-800
control module.
3.2
Navigation through the configuration menu
•
Press the LEFT
options.
•
To exit a menu option, press the ENTER
•
To validate a change and exit, press the ENTER
•
To exit without validating press the ESCAPE
3.3
Editing a numeric field
1.-
Press the ENTER
07/2012
to get into the Password menu and enter the
or LEFT
to move among modules, until
to get into the configuration option of the
or RIGHT
key to move among the menu
key to get into a menu option.
or DOWN
key.
key.
key.
Page 7
Publicidad
Tabla de contenido
