Pleasant Hearth L32-50 Manual Del Usario página 13

CARE AND MAINTENANCE
CLEANING THE FAN - WARNING: UNPLUG UNIT BEFORE CLEANING. Over time, a build-up of
lint, dust and other airborne matter such as pet hair can accumulate on the fan. This can cause the
safety cut-out system to operate. Remove the decorative glass facia and remove the appliance from
the wall (to remove the glass facia, follow Installation Steps 4 and 5 in reverse). Using a Phillips
screwdriver, remove the four screws (indicated) from the back of the appliance and remove the fan
cover to access the fan rotor. Using a clean, dry soft brush, very gently remove any build-up of dust
from the fan blades, cleaning the inside of the blades as well as the outside. Use a vacuum cleaner
nozzle to collect the dust.
IMPORTANT: THE FAN IS A VERY DELICATE COMPONENT AND EXTREME CARE SHOULD
BE TAKEN NOT TO DAMAGE THE FAN BLADES. DO NOT TOUCH THE FAN BLADES EXCEPT
WITH THE BRUSH.
Re-assemble the appliance and fit back on the wall.
IMPORTANT: DO NOT OPERATE THE HEATER WITHOUT THE FAN COVER FITTED.
Except the fan, which can be cleaned, there are no internal user serviceable parts.
Check regularly that wall mount is secure and screws are tight. Also check the main power cord
and connections. If the power cord becomes damaged, it must be replaced by a licensed electrician
in accordance with national and local codes.
Use only genuine manufacturer's replacement parts available from your supplier.
13