Assembly Without The Backrest; Maintenance And Cleaning - Welby 1271-15 Manual Del Usuario

Bath & Shower Chair

ASSEMBLY WITHOUT THE BACKREST:

1. Locate the 5 short screw knobs (H).
2. Follow the instructions; Seat & Frame Assembly and Installing Leg Extensions,
located on pages 3 to 5 of this manual.
3. Align leg frames with the four seat holes on each corner of the seat (fig.5).
4. Fasten legs to the seat by inserting the short screw knobs (H) through the leg
frame holes and corner seat holes. Turn the screw knobs clockwise until tight
(fig. 5).
5. Keep the backrest and 4 long screws (G) with this manual for future use.
Do not
over-tighten
screw knobs.

MAINTENANCE AND CLEANING

To clean the bath seat, wash it with soap and water or a mild detergent,
then rinse. Ensure that the bath seat is rinsed well before use.
AFTER SALES SUPPORT
1 866 558 8096
Fig. 5
service@eurocentra.net
MODEL: 1271-15 PRODUCT CODE: 1271
Assembly
9
07/2015