nOtICE OF SaFEtY SIGnS On tHE PRODUCt
danger – risk of damage to equipment if the instructions are not followed.
Electrical Hazard – Failure to follow the instructions may result in electric shock
and injury to persons.
the equipment is completed protected through double insulation.
warning
Follow the precautions and instructions as indicated below in order to ensure your safety
and that of your environment, and to prevent your device from any possible damage.
warning: a Switch-isolator compliant with En60947 standards is used as discon-
nect device. it must be easily accessible and be installed close to the power. it
shall disconnect all active polarities.
the
PRODUCt
Disposal of waste by users in private household in the countries of European Union.
this symbol on the product or on its packaging indicates that the product must not
be disposed into household waste. instead, it shall be your responsibility to bring
the waste to a collecting station especially provided for recycling of electric and
electronic components. the separate collection and recycling of your waste will
contribute to conserve natural resources and to ensure a recycling that is safe,
environmentally and health friendly.
Technical features (refer to Chapter 1.8 Dimensions of clocks)
Power supply
dimensions
operating conditions
MDE-RTnetwork-3076V1.3
is intended for use indoors only, at an altitude below 2000 meters.
voltage
Frequency
Current
Length
Width
Height
maximum operating tempature
Humidity
230vac
50-60Hz
0,1 a max
105 mm
90 mm
139 mm
60°C
90 %
15