KENMORE ELITE 100.8900890A Manual De Uso página 6

TOATTACH B OWLS TOMIXER
(seeFig.2)
1.Turn speed control t oOFF.
2.Unplug S tand mixer.
3.TilttheHead back.
4.Place bowl i nBowl C lamping Plate.
5.Turn bowlclockwise until s nug.
Fig. 3
TO REMOVE BOWLS FROM MIXER
(see Fig. 3)
1. Turn speed control to OFF.
2. Unplug Stand mixer.
3. Tilt the Head back.
4. Turn bowl counterclockwise until loosened
and pull up and out of Bowl Clamping Plate.
TO CONNECT FLAT BEATER,
WIRE WHIP OR DOUGH HOOK ATTACHMENTS
1. Turn speed control to OFF. Pin
2. Unplug Stand mixer.
3. Tilt the Head back.
4. Align slot at the top of Attachment Fig. 4
with pin on Tilt Head shaft. Push
Attachment up onto shaft and turn
counterclockwise until pin moves all the
way into the slot (see Fig. 4).
TO REMOVE FLAT BEATER,
WIRE WHIP OR DOUGH HOOK
1. Turn speed control to OFF.
2. Unplug Stand mixer.
3. Tilt the Head back.
4. Turn Attachment clockwise on shaft until pin on shaft lines up with slot
on attachment. Pull off.
6