Safety Precautions - BDS 40106 Manual Del Usuario

SAFETY PRECAUTIONS

To prevent accidents that could possibly result in serious injury and/or damage to vehicles and/or test
equipment, carefully observe all safety rules and test procedures when working on vehicles
Do not wear loose clothing or jewelry while working on engine. Loose clothing can get
caught in fan, pulleys, belts, etc. Jewelry can conduct current and can cause severe
burns if comes in contact between power source and ground..
Before working on a vehicle, set the brakes and block the wheels. Beware of
automatic parking brake releases.
When the engine is running, it produces carbon monoxide, a toxic and poisonous
gas. Always operate the vehicle in a well ventilated area. Do not breathe exhaust
gases – they are hazardous that can lead to death.
Fuel and battery vapors are highly flammable.
Do not smoke near the vehicle during testing
When engine is running, many parts (such as pulleys, coolant fan, belts, etc) turn at
high speed. To avoid serious injury, always be alert and keep a safe distance from
these parts.
Engine parts become very hot when engine is running. To prevent severe burns,
avoid contact with hot engine parts.
Never lay tools on vehicle battery. You may short the terminals together causing
harm to yourself, the tools or the battery.
INTRODUCTION
1. Ignition timing knob: Used for engines
which have only DTC mark but no ignition
timing mark.
2. Battery Clip red to supply the Timing Light
powered from the vehicle battery
3. Battery Clip black to supply the Timing
Light powered from the vehicle battery
4. Test Clip (green): for RPM and Dwell.
5. Inductive Pick-up: to clamp onto spark
cable number 1.
6. Trigger: Press to switch on timing light.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
- 2 -
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed