Inficon D-TEK CO2 Manual De Operación página 6

Recharging the Power Stick
A fully charged power stick should provide power for greater than 6½ hours of
continuous operation. To recharge the power stick, use one of the instrument's
power cords.
NOTE: The D-TEK CO2 does not need to be fully charged to operate.
Additionally, the power stick does not need to be fully discharged before
recharging.
W A R N I N G
Do not attach any other power cords to the D-TEK CO2's power
jack except the AC power adapter and DC cords designed for this
instrument.
 Connect the AC power adapter cord to the instrument and plug the adapter
into a working outlet, OR,
 Connect the cigarette lighter adapter to the D-TEK CO2 and tap the power
from your vehicle's battery.
The battery charging indicator (rear left side) will flash when the power stick is
charging, changing to steady illumination when the power stick is fully charged.
Allow 10 hours for a full charge.
6