Programme sequence
indication
This row of indicator lamps signals the
state of the running programme.
»Delayed start«
This indicator is on if the delayed start is
activated.
»Pause«
This indicator flashes, if the programme
was temporarily stopped with the »Start/
Pause«
button.
• To continue the programme press the
»Start/Pause«
»Prewash«
This indicator is on during the pre-wash
cycle – if the pre-wash function is activated
for a wash programme.
»Wash«
This indicator is on during the main-wash
cycle.
»Rinse«
This indicator is on during the rinse cycles.
3
If the appliance detects an overdose of
washing detergent, an extra rinse cy-
cle is automatically included.
»Spin«
This indicator is on during the final spin –
after the final rinse cycle or when the spe-
cial »Spin/Drain« programme is running.
3
If the appliance does not spin, the pro-
gramme may be stopped by the rinse-
hold function.
It could also be that the automatic
spin-correction-system was activated –
due to too great an imbalance of the
drum.
G
54
Pause
Stop
button again.
»Stop«
This indicator signals that the programme
has completed its cycle.
Programme duration
The actual duration of a programme cycle
depends on the selected programme and
the activated additional functions for this
programme.
3
The informations shown in the table
"Technical Specifications and Con-
sumption Data" apply to programmes
without additional functions.
Indicator lamps
These indicator lamps signal any unusual
condition of the appliance.
»Water tap«
The left indicator lamp will light if the wa-
ter does not flow correctly.
• Check to see if the tap is fully open.
Perhaps the inlet hose is bend or the
inlet filter soiled?
»Foaming«
The indicator lamp in the centre will light
if too much foam develops. An extra rinse
cycle is included then.
• For the next wash fill in a little less
washing detergent.
»Child-proof lock«
The right indicator lamp is on while the
child-proof lock is activated.
• To deactivate the child-proof lock see
"Child-proof lock".