Description (Fig. A) - Princess 234000 Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
Congratulations!
You have purchased a Princess product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product for
many years.
The appliance can be used by children
from 8 years and above and by
persons with a physical, sensory,
mental or motorial disability, or lack
of experience and knowledge if they
are supervised or instructed on how
to use the appliance in a safe way
and understand the hazards involved.
Children shall not play with the
appliance. Cleaning and maintenance
shall not be made by children unless
they are older than 8 years and
supervised. Keep the appliance and
the mains cable out of the reach of
children younger than 8 years.

Description (fig. A)

Your 234000 Princess water boiler has been
designed for boiling water. The appliance is
not suitable for boiling liquids other than water.
The appliance is suitable for indoor use only.
The appliance is suitable for domestic use only.
1. Power indicator
2. Reset switch / On/off indicator
3. Water boiler
4. Water level indicator
5. Handgrip
6. Lid
7. Base
8. Spout
9. Removable filter
Note: The appliance can be used together with
the following models: 204000 Princess juicer.
Insert the mains plug of the appliance into
the socket in the back of the juicer.
Insert the mains plug of the juicer into the
wall socket.
Initial use (fig. A)
Clean the appliance. Refer to the section
"Cleaning and maintenance".
Clean the accessories. Refer to the section
"Cleaning and maintenance".
Before you proceed, we need you to pay
attention to the following notes:
-
Before first use, completely fill the water
boiler with water without using the water
for consumption or other purposes.
Fill the water boiler (3) with water up to
the maximum mark on the water level
indicator (4).
Boil the water.
Refer to the section "Boiling water".
Empty the water boiler (3).
Use
Boiling water (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
-
Before filling the water boiler, always
remove the water boiler from the base.
-
Only use tap water to fill the water boiler.
-
Always make sure that the water level does
not exceed the maximum mark (0.5 litres)
on the water level indicator. If the water
level is above the maximum mark, the
water boiler will boil over and hot water
will spray out.
-
Do not remove the water boiler from the
base until the appliance has been switched
off.
Place the appliance on a stable and flat
surface.
Remove the water boiler (3) from the base
(7).
Open the lid (6).
Make sure that the removable filter (9) is
correctly placed in the water boiler (3).
Fill the water boiler (3) with water.
Close the lid (6).
Place the water boiler (3) onto the base (7).
Insert the mains plug into the wall socket.
The power indicator (1) comes on.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido