Maintenance - Fulgor Milano FPH G Serie Instalación, Uso, Mantenimiento

Prior to any operation,
appliance from the electrical system.
For long-life to the equipment, a general
cleaning operation must take place periodically,
bearing in mind the following:
•
the glass, steel and/or enamelled parts must
be cleaned with suitable non-abrasive or
corrosive products (found on the market).
Avoid chlorinebase products (bleach, etc.);
•
avoid leaving acid or alkaline substances on
the working area (vinegar, salt, lemon juice,
etc.).
•
the wall baffle and the small covers (mobile
parts of the burner) must be washed
frequently with boiling water and detergent,
taking care to remove every possible
encrustation. Dry carefully and check that
none of the burner holes is fully or partially
clogged;
NB: Cleaning of the taps must be carried
out by qualified personnel, who must
be consulted in case of any functioning
anomaly.
Check periodically
conservation
feed pipe. In case of leakage, call
immediately the qualified technicians
for its replacement.
DO NOT USE STEAM CLEANERS
disconnect the
the state
of the flexible gas
of

Maintenance

EN
5