Preparing For Use; Attaching The Brush Head; Charging The Appliance; Using The Appliance - Philips Sonicare HealthyWhite+ Manual Del Usuario

4 Power on/off and mode button
5 Intensity level indicator
6 Intensity level button (+ and -)
7 Mode indicator
8 Battery level indicator
9 Charger
Note: The content of the box may vary based on the model purchased.

Preparing for use

Attaching the brush head

1 Align the brush head so the bristles face the front of the handle.
(Fig. 2)
2
Firmly press the brush head down onto the metal shaft until it stops.
Note: Philips Sonicare brush heads are imprinted with icons to easily identify
your brush head.

Charging the appliance

1 Put the plug of the charger in a wall socket.
2 Place the handle on the charger (Fig. 3).
The flashing light of the battery level indicator indicates that the
,
toothbrush is charging.
Note: It can take up to 48 hours to fully charge the battery, but the Philips
Sonicare may be used before it is fully charged.

Using the appliance

Brushing instructions

1 Wet the bristles and apply a small amount of toothpaste.
2 Place the toothbrush bristles against the teeth at a slight angle
(45 degrees), pressing firmly to make the bristles reach the gumline
or slightly beneath the gumline. (Fig. 4)
Note: Keep the center of the brush in contact with the teeth at all times.
ENGLISH
9