Activating Or Deactivating The Easy-Start Feature - Philips Sonicare HealthyWhite+ Manual Del Usuario

ENGLISH
12
Features
Smartimer
The Smartimer indicates that your brushing cycle is complete when it
automatically switches off the toothbrush at the end of the brushing
cycle. Dental professionals recommend brushing no less than 2 minutes
twice a day.
Easy-start
- The Easy-start feature gently increases power over the first 14 brushings
to help you get used to brushing with the Philips Sonicare.
- This Philips Sonicare comes with the Easy-start feature deactivated.

Activating or deactivating the Easy-start feature:

Place the handle in the plugged-in charger.
- To activate Easy-start:
Press and hold the power on/off and mode button for 2 seconds.
You hear 2 beeps and the battery level indicator lights up green to
indicate that the Easy-start feature has been activated.
- To deactivate Easy-start:
Press and hold the power on/off and mode button for 2 seconds.
You hear 1 beep and the battery level indicator lights up yellow to
indicate that the Easy-start feature has been deactivated.
Note: Each of the first 14 brushings must last at least 1 minute to move
through the Easy-start ramp-up cycle properly.
Note: Use of the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces the effectiveness of the Philips Sonicare
toothbrush in removing plaque.
Quadpacer
- The Quadpacer is an interval timer that has a short beep and pause
to remind you to brush the 4 sections of your mouth evenly and
thoroughly. Depending on the brushing mode you have selected,
the Quadpacer beeps at different intervals during the brushing
cycle (Fig. 6).