Care & Maintenance; Cleaning The Filter - Levoit Core 200S Manual De Usuario

EN
C A R E & M A I N T E N A N C E
Cleaning the Air Purifier
• Unplug before cleaning.
• Wipe the outside of the air purifier with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
Vacuum the inside of the air purifier.
•
Do not clean with abrasive chemicals or
•
flammable cleaning agents.
Check Filter Indicator
will light up as a reminder to check the
filter. Depending on how often you use the
air purifier, the indicator should turn on within
6–8 months. You may not need to replace
your filter yet, but you should check it when
turns on.

Cleaning the Filter

The outer pre-filter should be cleaned
every 2–4 weeks to increase efficiency
and extend the life of your filter. Clean the
pre-filter using a soft brush or vacuum hose
to remove hair, dust, and large particles.
Do not clean the filter with water or other
[Figure 4.1]
liquids.
Filter
Nylon
Pre-Filter
True HEPA &
High-Efficiency
Activated
Carbon Filters
14
When to Clean
Every
2–4 weeks
Do not clean
Resetting the Check Filter
Indicator
Reset the Check Filter Indicator when:
A. lights up red.
1. Replace the filter (see page 15).
2. Turn on the air purifier.
3. Press and hold
will blink 3 times and turn off
once successfully reset.
B. The filter was changed before
1. Press and hold
will blink 3 times and turn off
once successfully reset.
Note: You can also reset the Check Filter
Indicator in the VeSync app.
How to Clean
Use a soft brush or
vacuum hose
[Figure 4.1]
for 3 seconds.
lit up.
for 3 seconds.
Figure 4.1
When to Replace
6–8 months