Vesync App Troubleshooting - Levoit Core 200S Manual De Usuario

EN
V E S Y N C A P P T R O U B L E S H O OT I N G
My smart air purifier isn't connecting to the VeSync app.
• During the setup process, you must be on a secure 2.4GHz WiFi network. Confirm that the
network is working correctly.
• Make sure the WiFi password you entered is correct.
◦
There should be no spaces at the beginning or end of the password.
◦
Test the password by connecting a different electronic device to the router.
◦
If you're manually typing in the SSID and password, double check that both are entered
correctly.
• Try moving your air purifier closer to the router. Your phone should be as close as possible to
your air purifier.
• Your router may need to be at a higher location, away from obstructions.
• Make sure your air purifier and router are away from appliances (such as microwave ovens,
refrigerators, electronic devices, etc.) to avoid signal interference.
• If you're using a VPN, make sure it's turned off while setting up your air purifier.
• Disable portal authentication for your WiFi network. If portal authentication is enabled, the air
purifier will not be able to access your WiFi network, and setup will fail.
Note: Portal authentication means that you need to sign in to your WiFi network through a
web page before you can use the Internet.
My air purifier is offline.
• Make sure the air purifier is plugged in and has power, then refresh the VeSync menu by
swiping down on the screen.
• Make sure your router is connected to the internet and your phone's network connection is
working.
• Delete the offline air purifier from the VeSync app. Swipe left (iOS®) or tap and hold (Android™),
then tap Delete
• Reconfigure the air purifier with the VeSync app.
Note: Power outages, internet outages, or changing WiFi routers may cause the air purifier to
go offline.
If your problem is not listed, please contact Customer Support (see page 19).
18
.