Planet POE-161S Manual De Usuario página 8

5.2 802.3at Device Installation
1. PLANET 802.3at PoE+ Splitter also provides an alternative to
making the non IEEE 802.3af/802.3at devices connect with an IEEE
802.3at PSE power device like Power over Ethernet Plus Injector or
Power over Ethernet Plus Switch as the figure is shown below
802.3at In-line Power Switch
1000BASE-T UTP
1000BASE-T UTP with PoE
PoE
Power Line (DC)
DC
Figure 3: "802.3at PoE+ Splitter" Connecting to IEEE 802.3at Device
With IEEE 802.3af/802.3at standard, PLANET 802.3at
PoE+ Splitter also can function with IEEE 802.3af/802.3at
End-span Switch that feeds power over Pins 1, 2, and 3, 6.
Note
5.3 802.3at PoE+ Injector and 802.3at PoE+ Splitter
Installation
The 802.3at PoE+ Splitter and 802.3at PoE+ Injector can run in
pair to provide DC Power for those non PoE remote devices or Ethernet
equipment. The table below shows PLANET 802.3at PoE+ Injector
models:
Model PoE Standard
POE-161 IEEE 802.3at/af
POE-163 IEEE 802.3at/af
POE-164 IEEE 802.3at/af
1-4
100 meters
POE-161S (
Power 5V/12V)
CAUTION
Incorrect voltage might
cause device damage
5V 12V
Data Power
PoE
802.3at
PoE+ Splitter
Max. PoE Out
30 watts
30 watts
30 watts
POE-162S (
Power 24V/12V)
CAUTION
Incorrect voltage might
cause device damage
24V 12V
Data
DC
Power
Power In Pass-thru. Speed
56V DC 10/100/1000Mbps
54V DC 10/100/1000Mbps
53V DC 10/100Mbps
PTZ Speed
Dome