Blade FR-TEC SUZUKA WHEEL ELITE Manual Del Usuario página 6

INTRODUCTION OF PLATFORMS
Connection and Installation with PlayStation® 3:
• Insert the cables of pedals and Six-speed shifter as the complete set into the corresponding interfaces of the steering wheel;
turn on your PS3™ and then insert the main cable of the steering wheel into the PS3™ USB port.
• After booting, the steering wheel LED indicator will light up and the PS3™ will automatically distribute a channel for the wheel.
• You may now start playing the game, or enter the related configurations.
• You can press the Home button once to enter the XBM configuration when playing a gamewhich can display the current
controller player. Or, you can press and hold the Home button for 2 seconds to enter the shutdown settings.
Connection and Installation with PlayStation 4™
• Modes Descriptions:
1. The steering wheel without Six-speed shifter which is in Controller Mode.("PS4 Need for Speed"
series only supports Controller/gamepad Mode. Please do not connect Six-speed shifter. )
2. The steering wheel with Six-speed shifter is in Wheel Mode, Not support vibration.
• Insert the matching pedals and Six-speed shifter as the complete set into the corresponding interfaces of the steering wheel;
connect the original PS®4 controller with the USB cable and insert the cable into the steering wheel for guiding. the PS4™
controller must be turned off during guiding steps).
• Turn on your PS4™ and then insert the main cable of the steering wheel into the PS4™ USB port.
• After connecting, the steering wheel LED indicator will light up. Press the HOME button. After the guiding is successful, the
LED indicator of the PS4™ controller will light up, and you may now start playing the game, or enter the related configura-
tions.
• You can press the Home button once to enter the main interface when playing a game, or, you can press and hold the Home
button for 1 second to enter the shutdown configuration.
Connection and Installation with Xbox 360™
• Insert the cables of pedals and Six-speed shifter as the complete set into the corresponding interfaces of the steering wheel;
connect the original XBOX 360™ controller with the USB cable and insert the cable into the steering wheel for guiding pro-
cess (the XBOX 360™ controller must be turned off ).
• Turn on your XBOX 360™ and then insert the main cable of the steering wheel into the XBOX 360™ USB port.
• After successful guiding, the steering wheel LED indicator will light up, the LED indicator of the XBOX 360™ controller will
also light up , and you may now start playing the game, or enter the related configurations.
• You can press the Home button (equivalent to the Guide button of the original controller) to enter the main interface when
playing a game.
Connection and Installation with Xbox One™
• Xbox One : When the steering wheel is connected to Six-speed shifterwhich is under the "Steering Wheel" mode.
• The mode does not support vibration, and headset functions.
• Insert the cables of pedals and Six-speed shifter as the complete set into the corresponding interfaces of the steering wheel;
10
connect the original XBOX ONE™ controller with the USB cable and insert the cable into the steering wheel for guiding (the
XBOX ONE™ controller must be turned off).
• Turn on your XBOX ONE™ and then insert the main cable of the steering wheel into the XBOX ONE™ USB port.
• After successful guiding, the steering wheel LED indicator will light up, the LED indicator of the XBOX ONE™ controller will
also light up due to the corresponding channel, and you may now start playing the game, or enter the related configurations.
• You can press the Home button (equivalent to the Guide button of the original controller) once to enter the main interface
when playing a game, or, you can press and hold the Home button for 1 second to enter the shutdown configuration.
• At the main interface, you can press the Y button to enter the quick searching page of the Internet.
PC mode :
Steering Wheel Mode ( Connect to Six-speed shifter )
• When the steering wheel is connected to the Six-speed shifter which is under the "Steering Wheel" mode.
Gamepad Mode ( Does not connect with Six-speed shifter. )
1.PC ( X-INPUT )
• The default is X-INPUT mode, and the red LED will light up.
• Press and hold the HOME button for 3 seconds to enter D-INPUT mode, and the red LED indicator will blink for 3
seconds and then light up; press and hold the HOME button again for 3 seconds to return to X-INPUT mode.
2.PC ( D-INPUT )
• Enter WINDOWS Vista/7/8/10 OS, insert the driver disc, press SETUP twice and install the driver following the ins-
tructions.
• Connect the wheel to PC / USB Startup Control Panel Equipment & Printer Right Click Equipment Controller
Settings Property.
Product Testing:
• At the test interface, you can do the function test of buttons and axes separately.
• Correct the axis in the calibration interface.
• At the vibration interface, you may test the vibration function through axes or pedals (left bumper or right bumper).
Unload Drive:
• Startup/Control Panel /App & Function.
• Find the drive name to be deleted in the "Unload or Change App"menu. Click "Delete" and operate according to
the prompt for unload.
Connection and Installation with Nintendo Switch™
• Turn on the SWITCH™, insert the pedal cable as the complete set into the corresponding interfaces of the steering
wheel; connect the steering wheel and SWITCH™ via the USB interface.
• Or connect the main USB cable of the steering wheel to the SWITCH™ via the type-c cable.
• If the connection succeeds, the wheel LED indicator will light up, and you may now start playing the game, or enter the
related configurations.
• Press the "SHARE/9/VIEW/-" and "OPTIONS/10/MENU/+" buttons for screenshot.
11