Assemble The Wall Charger; Install The 4G Lte Sim Card - Novatel Wireless MiFi 4510 Manual Del Usuario

Assemble the Wall Charger

The wall charger comes with a removable plug. You need to connect it before using the MiFi device
for the first time. To assemble the wall charger, follow these steps.
➊
Remove the plug and the wall charger from the package.
➋
Slide the plug onto the wall charger.

Install the 4G LTE SIM Card

To install your new 4G SIM card, follow these steps.
➊
Open the cover located on the underside of the MiFi 4510.
➋
Remove SIM card from the outer card, being careful not to touch the gold-colored contacts.
➌
Hold the card as shown, with the gold-colored contact points facing down.
➍
Insert the SIM card into the slot. The 4G LTE SIM card MUST remain in the SIM card slot when
in use.
Your SIM (Subscriber Identity Module) card is a small rectangular plastic card that stores your phone
number and important information about your wireless service.
CAUTION!
Do not bend or scratch your SIM card. Avoid exposing your SIM card to static
electricity, water, or dirt.
12