Port Ranges
You can define up to five port ranges for each application. Each port range has the following
options:
Start Port — Type the beginning of the range of port numbers used by outgoing traffic
•
for this application. Use as many rows as necessary to define the required number of port
ranges. Unused rows can be left blank.
End Port — Type the end of the range of port numbers. If the port is a single port instead of a
•
range, type the same value for both the Start Port and the End Port.
Protocol — For each port range (each row), select the protocol (TCP, UDP, or both) used by
•
that port range.
You can define all of your applications before you click Apply to save your changes.
Use the Ports and Hide links as necessary to open and close the Port Definition Panel so you can
define the ports for each application as needed.
Buttons
Apply — Click this button to save changes made to the applications and/or port ranges.
•
Revert — Click this button to discard changes made to the applications and/or port ranges.
•
45