Publicidad
1. To enter the router's Web interface (WebUI), type
2. Use login information shown in image A when prompted for authentication.
3. After you login, you will be prompted to change your password for security reasons. The new password must
contain at least 8 characters, including at least one uppercase letter, one lowercase letter and one digit. This step is
mandatory and you will not be able to interact with the router's WebUI before you change the password.
4. When you change the router's password, the
used to setup some of the router's main operating parameters.
5. Go to the
Overview
performance try adjusting the antennas or changing the location of your device to achieve the best signal
conditions.
A.
http://192.168.1.1
Please enter username and password
admin
Username
admin01
Password
Login
RF technologies
Max RF power
Power adapter
Mobile antenna
WiFi antenna
GNSS antenna
*Order code dependent.
**Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.
page and pay attention to the
TECHNICAL INFORMATION
2G, 3G, 4G, WiFi, GNSS
33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@ WiFi
Bundled accessories specifications*
Input: 0.4A@100-240VAC, Output: 9VDC, 1A, 4-pin plug
698~960/1710~2690 MHz, 50 Ω, VSWR<3, gain** 3 dBi, omnidirectional, SMA male connector
2400~2483.5 MHz, 50 Ω, VSWR<2, gain** 5 dBi, omnidirectional, RP-SMA male connector
1575.42~1602 MHz, 2.2~5 VDC, VSWR<1.5, gain** 28 dB (typ.), RHCP polarization, SMA male connector
LOGIN TO DEVICE
http://192.168.1.1
Configuration Wizard
Signal Strength
indication (image B). To maximize the cellular
B.
Data connection state
State
SIM card slot in use
Bytes received/sent *
Radio specifications
into the URL field of your Internet browser.
will start. The
Configuration Wizard
Registered (home); OPERATOR; 4G (LTE)
is a tool
-65 dBm
Connected
Ready
348.7 KB / 223.5 KB
Publicidad
