Maintenance & Storage - Kokido EV80 Manual De Usuario

MAINTENANCE & STORAGE
NOTE:
1. Be sure to clean and dry the charging contact plates after every use to avoid the
forming of stains (byproduct of a natural chemical reaction between electric current
and water). Otherwise, the stains can be removed by light scrubbing with a cotton bud
soaked with juice of lemon or vinegar.
2. Battery discharges on its own during storage. Make sure to charge the pool vacuum
to about 30% to 50% of the battery capacity before it is stored.
3. You must re-charge the battery at least once every three months when it is not in use.
Unplug the external adaptor from socket and then unplug the adapter jack from the

charging base.
Detach accessories from the pool vacuum. If necessary, rinse the pool vacuum and

accessories with fresh water. DO NOT use detergent.
Make sure to drain the water from the rear body through the holes located inside the

chamber that connects to the handle/ pole connector, and the hole on the rear of the
body.
Make sure to drain the water from the handle through its hole on the bottom end.

Use a damp cloth to clean and dry the pool vacuum and its accessories.

Store them in a well-ventilated area away from the sunlight, children, heat, ignition

sources, and pool chemicals. Ambient temperature for storage should be 10˚C –
25˚C (50˚F – 77˚F). NOTE: A higher temperature may reduce the battery life during
storage.
WARNING!
- Never attempt in any way to disassemble the pool vacuum.
- Under no circumstances should you attempt to disassemble the pool
vacuum and replace the impeller, motor and battery by yourself.
18