Ferroli NAPOLI Instrucciones Para La Instalación página 48

The thermal emitter must be fixed to the wall using the spacers, brackets, screws and wall plugs
supplied with the device, according to the instructions on the template printed on the box.
If you do not have this template, you can follow the instructions:
1. Mark the position of the holes on the wall according to the following instructions.
Model
NAPOLI 600
NAPOLI 1000
NAPOLI 1200
NAPOLI 1500
NAPOLI 1800
2. Screw the 3 spacers to the wall in the 3
upper drill holes.
3. Insert the bracket in the bottom right cor-
ner of the emitter, towards the wall.
48
EN
Height (mm)
A B C D
280 190 257 85
280 190 257 85
480 240 407 185
480 240 407 185
480 240 407 185
N A P O L I
D A
B
4. Hang the thermal emitter.
5. Screw the bracket to the wall in the lower
drill hole.
185
C
A73023140