Technical Specifications; Description Of The Symbols - Lea LE36260-60DR Instrucciones Originales

1. LIST OF MAIN PART(Fig.1)
1. Blades
3. Front handle
5. Silencer cover
7. Primer pump
9. Fuel tank
11. Ignition switch
13. Throttle trigger
15. 4mm Allen keys
17. Socket spanner

2. TECHNICAL SPECIFICATIONS

Model
Unit mass (empty tanks without cutting attachment)
Volumes of fuel tank
Engine model
Engine type
Engine Displacement
Rated engine speed
Effective cutting length
Max cutting capacity
Maximum shaft brake power of the engine
Fuel ratio
Vibration a
hv

3. DESCRIPTION OF THE SYMBOLS

The use of symbols in this manual is intended to draw your attention to possible risks. The
safety symbols and the explanations that accompany them must be perfectly understood. The
warnings in themselves do not remove the risks and cannot replace correct actions for
preventing accidents.
Before use read instruction handbook.
Before any use, refer to the corresponding paragraph in the present manual.
Conform to relevant safety standards.
2. Shield
4. Choke lever
6. Air filter cover
8. Starter rope
10. Fuel cap
12. Throttle lock
14. Rear handle
16. 6-8mm spanner
18. Fuel mixing bottle
LE26260-60DR
5,8kg
0.65 L
1E34FN
Wind-cooling, 2-stroke
26.0 cm
3
7000 min
-1
600 mm
28mm dia.
0.7kW
40:1
6,3m/s (K=2,5 m/s
2
14
)
2