Publicidad
Idiomas disponibles
Idiomas disponibles
MOWER STATUS INDICATOR
MEANING
Red Flashing Light
Low battery
Steady Yellow Light
Mower Overloaded
Mower Failed to Start
Temperature Indicator
Mower is overheated
Flashing Yellow
Steady Green Light
Mower is working
properly.
Note: The power indicator will show green if the mower is in normal hand-push working
condition, self-propel working condition, or if the LED headlight is on.
6.6 Mowing Tips
NOTICE! A sharp blade will greatly enhance the performance of the mower,
especially when cutting tall grass. Make sure to check the sharpness of the blade
before mowing.
WARNING! If you strike a foreign object, stop the motor and remove the battery.
Thoroughly inspect the mower for any damage, and repair the damage before
restarting the mower. Excessive vibration of the mower during operation is an
indication of damage.
■
Before you begin, verify that the lawn is free of stones, sticks, wires, and other objects
which could damage the lawn mower or motor.
■
For best results, do not mow in circles. Travel back and forth across the lawn, creating
a grid of cut grass.
■
When cutting thick grass, reduce your walking speed in order to allow for a more
effective cut and a proper discharge of the clippings.
■
To maintain a healthy lawn, cut off only one-third or less of the total length of the
grass.
18
SUGGESTED ACTION
Stop the mower and
charge the battery.
Raise the cutting height
and restart the mower.
Call customer service
center.
Remove the battery from
the mower and move it to
the shade to cool down.
No action needed.
GREEN MACHINE 62V CORDLESS LAWN MOWER
6.7 Mulching Tips
■
Release the brake control bar to turn off the mower blade when crossing any graveled
areas.
■
Set the mower to the highest cutting height when mowing on uneven ground or in tall
growth.
■
For effective mulching, do not cut wet grass; it tends to stick to the underside of the
deck, preventing the proper mulching of grass clippings. The best time to mow grass is
in the late afternoon, when the grass is dry and the newly cut area will not be exposed
to direct sunlight.
■
For the best mulching performance, set the cutting height to remove approximately
one-third of the grass length. If the grass is overgrown, it may be necessary to increase
the cut height to make it easier to mow and to prevent overloading the motor.
■
Slow your cutting pace in tall or thick grass conditions. For mulching extremely thick
or tall grass, it is advisable to first cut at a high cut-height setting, and then re-cut to the
final cut height.
■
Always make sure that the blade is sharp before cutting.
6.8 Safety Precautions
■
Always make sure the deflector and/or the grass catcher is in the correct position.
■
Always stop the motor before removing the grass catcher or adjusting the height of
cutting position.
■
Before mowing, remove all foreign objects from the lawn which may be thrown by the
machine. While mowing, stay alert for any foreign objects which may have been missed.
■
Only lift the rear of the mower while it is off and the blades have stopped.
■
Never place your hands underneath the under pan or into the rear discharge chute
while the motor is running.
GREEN MACHINE 62V CORDLESS LAWN MOWER
19
Publicidad
