5
ASSEMBLY
WARNING! To prevent accidental starting that could cause serious personal injury,
always remove the battery pack from the tool when assembling parts.
WARNING! Do not attempt to modify this tool or create accessories outside of the
recommendations for this mower. Any such alteration or modification is misuse and
could result in a hazardous condition leading to serious injury.
5.1 Assemble The Folding Handle
1. Press and hold the quick adjusting lever to release the lower handle. Gently pivot
the handle from folding position to working position. (Fig.2A, 2B)
2. There are 3 adjusting heights to be chosen on the lawn mower. Move the lower
handle up and down to adjust to the proper height. Note: The left and right sides of
the lower handle must adjust to the same height. (Fig.2C)
3. Release the quick adjusting lever and continue to pivot the handle until you hear a
click and see the lock pin of both sides locked in position. (Fig.2B)
4. Connect the upper handle and lower handle with bolts and locking knobs. (Fig.2D)
5. Make sure the cable clamp attaches with the correct cable. (Fig.2E)
Quick adjusting
leve
F
. g i
2A
F
. g i
Cable clamp
F
. g i
2D
12
1
2
3
2B
F
. g i
2C
F
. g i
2E
GREEN MACHINE 62V CORDLESS LAWN MOWER
5.2 Assemblies To Manage Grass Clippings
WARNING!
Ensure that motor and blade are stopped.
Grass Catcher
1. Make sure that the mulch door is shut closed.
2. Raise the rear discharge cover (1, Fig 3)
3. Attach the grass catcher by inserting its frame hooks onto slots in the rear of mower
(2, Fig.3).
4. Lower the rear cover.
2
1
2
Side Discharge
1. Remove the grass catcher and store it in a safe place. Lower the rear discharge cover
shut.
2 Open the mulch door. (Fig.4A)
3. Install the side discharge chute under the mulch door by sliding two hooks under the
hinge pin on door assembly (Fig.4B). The mower is now ready for discharge operation.
Fig. 4A
GREEN MACHINE 62V CORDLESS LAWN MOWER
Fig. 3
Fig. 4B
13