Warnings; Assembly Instructions - Relaxxnow VTX300 Manual Del Usuario

WARNINGS

• his product is for personal use only.
• Any maintenance beyond standard care of the product should be performed
by an authorized professional
• Do not immerse the device in water.
• Do not remove any parts and do not remove the wiring or tamper with the
electrical system
• to avoid the risk of fire or electric shock.
• The product should only be repaired by an authorized specialist.
• If the power system of this unit is damaged, it must be replaced by the ma-
nufacturer or the responsible customer service provider or a similarly qualified
person in order to avoid hazards.

ASSEMBLY INSTRUCTIONS

Installation and Use
For the table fan
1. Place the pedestal (15) on a table, insert the adapter (19), and tighten it by turning the adap-
ter (19) clockwise. 2.Put the top pillar (No. 8) onto the connection adapter (No. 19). Tighten the
top button of the column (No. 11).
Fixing the Protective Grille
1. Remove and discard the plastic cover on the motor shaft (6). Position the rear grille (5) on the
front of the motor unit through the motor shaft (6). Make sure that the handle on the back of the
grille (5) is facing up and that the guide pins on the motor unit line up with the corresponding
cutouts on the rear grille (5).
2. Attach the rear grill (5) with the plastic screw (4). Tighten the screw on the motor unit clock-
wise. 3. Install the propeller (3) on the motor shaft (6) so that the cutouts fit. Place the propeller
cover (2) behind the propeller (3) on the motor shaft (6). To attach, tighten the propeller cover
(2) counterclockwise.
26 Relaxxnow
EN