Troubleshooting - Relaxxnow VTX300 Manual Del Usuario

TROUBLESHOOTING

If the fan stops working, please follow these steps before
contacting customer service:
PROBLEM
The fan does not
turn on.
The fan has suddenly
stopped
The oscillation
function does not
work.
The fan is on, but
the wind is not
strong enough.
The remote control
does not work.
Please do not try to open or repair the fan yourself. This could
void the warranty and cause damage or injury.
36 Relaxxnow
POSSIBLE CAUSE
Fan is not connected
to a 220-249 V
AC, 50/60 Hz
socket.
The timer has
expired and
the fan has
switched off
automatically.
The oscillation
function was
not switched on
There is dust/
debris on the back
of the fan.
Die The
batteries are too weak.
The remote is too far
away from the device.
The remote control does
not send a signal to the
device.
SOLUTION
Plug it into the
appropriate outlet and
turn it on again
Check all the timer lights
on the control switch are
off. If any of the lights are
on, press the timer
button until all lights are
off
Check the corresponding button for
the oscillation function is on. If not, press
the button to start the
function. This can also be done while the
fan is in operation.
Turn off the fan and pull out the plug.
Clean the
rear grille with a soft, dry
cloth. Plug in again and
turn it back on
Follow the operating
instructions of the
remote control and the
guidelines for using the
remote control batteries