Introduction; Intended Use; Features - Parkside Performance PSBSAP 20-Li A1 Traducción Del Manual De Instrucciones Original

CORDLESS HAMMER DRILL SET
PSBSAP 20-Li A1

Introduction

Congratulations on the purchase of your new
tool. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This tool is intended for screwing in and removing
screws as well as drilling in wood, metal, ceramic
and plastic and impact drilling in bricks and masonry.
It is not suitable for impact drilling in natural stone
such as granite. The light on this tool is intended to
illuminate the immediate work area of the tool.
Use this product only as described and for the
areas of applications specified. The tool is not
intended for commercial use. Any other usage or
modification of the tool is deemed to be improper
and carries a significant risk of accidents. The
manufacturer accepts no responsibility for damage
attributable to misuse.
50
│ GB │ MT
■

Features

Additional handle
Depth stop
Teeth on the depth stop
Mounting ring for the additional handle
Locking button for the depth stop
Speed selector switch
Rotation direction switch/lock
ON/OFF switch/speed control
Belt clip
LED work light
Torque selection ring
Chuck
Fig. A
Battery pack
Release button for the battery pack
High-speed charger
Battery display LED
Battery charge level button
Red charge control LED
Green charge control LED
Fig. B
Cutter knife (incl. 8 spare blades)
25 mm bits (2x 36 pcs; 2x bit holders)
1/4" ratchet screwdriver
Metal/wood drill bit set
Measuring tape
1/4" screwdriver
PSBSAP 20-Li A1