HAMPTON BAY 52-CL Guía De Uso Y Cuidado página 7

Assembly - Hanging the Fan
1
Attaching the fan to the electrical
box
NOTE: For better fan performance, make sure the
mounting plate is level. Additional washers (HH)
(not included) may be needed to insert between
the outlet box and mounting plate.
□
Turn the power off.
□
Securely attach the mounting plate (A) to the outlet box (FF)
using the two screws (GG) supplied with the outlet box (FF).
Pull the 120-volt supply wires (the black, white and ground
wires) out of the outlet box (FF) and through the hole in the
mounting plate (A) and lay them to the side.
2
Hanging the fan-motor assembly
□
FF
HH
A
GG
□
BB
7
Carefully lift the fan-motor assembly (C) and engage
the slot in the motor bracket on the top of the fan-
motor assembly (C) with the hook on the mounting
plate (A) so that it is securely suspended. Then
connect the wiring to your fan according to step 3
"Making the Electrical Connections".
Once wiring is completed, lift the motor bracket on
the top of the fan-motor assembly (C) so that the
threaded studs (II) on the mounting plate (A) pro-
trude through the slot in the motor bracket. Securely
tighten the three locknuts (BB) onto the threaded
studs (II), then try to shake the fan-motor assembly
(C) to ensure that the assembly is tight.
Please contact 1-855-HD-HAMPTON for further assistance.
C
A
C
HAMPTONBAY.COM