Assembly; Making The Electrical Connection; Important - HAMPTON BAY 52-CL Guía De Uso Y Cuidado

Assembly - Hanging the Fan (continued)
3

Making the electrical connection

WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the plastic wire connectors (CC) supplied
with your fan. Secure the connectors with electrical tape
and ensure there are no loose strands or connections.
□
Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (CC).
□
Connect the fan motor white wire to the household white wire
using a wire connecting nut (CC).
□
Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (CC).
□
Secure each wire connecting nut (CC) using electrical tape.
□
Turn the wire connecting nut (CC) upward and push the wiring
into the outlet box (FF).
Black & Blue
Outlet box
in the ceiling (FF)
Green or bare wire
White
Green
4
Completing the fan assembly
□
Remove the two screws on two diagonal sides from
the top of the mounting plate (A) and loosen the
other two screws.
□
Align the two key slots on the top of the motor
housing (B) with the two screws on the mounting
plate (A). Push the motor housing (B) up and turn it
clockwise to lock in the mounting plate (A). Tighten
the two screws.
□
Install the two screws that were removed at the
beginning of this step into the remaining two holes
and tighten the four screws firmly.
8
A
B
C