Kohler K-1954 Guía De Instalación Y Cuidado página 9

1/4" (6 mm) Maximum
4. Adjusting the Module Location
NOTE: To achieve optimal module range and performance, the top
of the module may either lightly contact the bottom of the tank lid
or be within 1/4" (6 mm) of the bottom of the lid. The tank lid and
module can be in contact with each other when the module is
installed, as long as the tank lid sits on the tank correctly when
closed.
Position the tank lid on the tank. Check for fit. Confirm the pads
are correctly installed.
Confirm the module height allows the tank lid to rest in the
correct position.
If the module or bracket interferes with the tank lid, first confirm
the bracket is tight against the rim of the tank.
NOTE: To confirm the tank lid is within 1/4" (6 mm) of the
module, place four quarters on the module. If the tank lid touches
the quarters, the module is within 1/4" (6 mm) of the tank lid.
Confirm the top of the module is within 1/4" (6 mm) or contacts
the bottom of the tank lid.
Adjust the bracket height as needed until the correct module
position is achieved.
Move the tank lid to a safe location when the adjustments are
complete.
Kohler Co. 9
Lid
1216369-2-D