Descargar Imprimir esta página

Kohler K-1124-HL Guia De Instalacion página 2

Ocultar thumbs Ver también para K-1124-HL:

Publicidad

Idiomas disponibles

Idiomas disponibles

18"
(45.7 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
Product Information
Applicable product:
Integral apron and heater, left drain
Integral apron and heater, right drain
Fixture*:
Bathing well:
Basin area, bottom
51-3/8" (130.5 cm) x 21" (53.3 cm)
Basin area, top
64-1/2" (163.8 cm) x 30-1/2" (77.5 cm)
Weight
140 lbs (63.5 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
72 gal (273 L)
* Approximate measurements for comparison only.
Pump:
1-speed
Heater:
kW
1.5
Pump is supplied with 24" (61 cm) grounding-type plug-in
cord.
1063767-1-C
72" (182.9 cm)
3/4" (1.9 cm)
K-1124-HL
K-1124-HR
V
Hz
A
120
60
7
V
Hz
A
120
60
12.5
No change in measurements if connected
with drain illustrated. (K-7272)
19"
(48.3 cm)
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
43 lbs/square foot (210 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/4"
(3.2 cm)
1/2" (1.3 cm) R.
Integral Flange
Detail
36" (91.4 cm)
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
Kohler Co.

Publicidad

loading

Este manual también es adecuado para:

K-1124-hr