Descargar Imprimir esta página

Helvex MAGNA UTV-048 Guia De Instalacion página 2

Publicidad

Unscrew the nipple (included) from the tub spout.
2
(incluido) de la salida de tina
1/2-14 NPT - 1/2-14 NPSM nipple (included)
niple 1/2-14 NPT - 1/2-14 NPSM (incluido)
Screw the tub spout in to the nipple.
4
Apply plumber´s tape
around the threads.
Coloque teflón en las
cuerdas.
Troubleshooting / Posibles Causas y Soluciones
Problem /
Problema
There is a leak in the spout. /
Hay fuga en la salida.
Cleaning Recommendations / Recomendaciones de Limpieza
It is very important to follow the instructions below to preserve HELVEX products
finishings, shiny and in perfect conditions:
1. Use only water and a clean cloth.
2. Do not use fibers, powders, abrasives, or chemicals.
3. Do not use sharp objects to clean the finishings.
4. It is recommended to clean your device daily.
Visit our website www.helvexusa.com
/
Desenrosque el niple
.
gasket
empaque
tub spout
salida de tina
/ Enrosque la salida de tina en el niple.
Causes
/ Causas
Plumber's tape was not applied on the connections. /
No se colocó teflón en las conexiones.
Screw the nipple (included) to the connector (no included).
3
el niple (incluido) en el conector (no incluido).
1/2-14 NPT connector ( not incluided)
conector 1/2-14 NPT (no incluido)
Solutions
Apply plumber´s tape on the connections. (Page 2, step 3 and 4). /
Coloque teflón en las conexiones (Pág. 2, paso 3 y 4).
Es muy importante seguir las siguientes instrucciones para conservar los
acabados de los productos HELVEX, con brillo y en perfecto estado:
1. Utilice únicamente agua y un paño limpio.
2. No utilice fibras, polvos, abrasivos, ni productos químicos.
3. No utilice objetos punzo-cortantes para limpiar los acabados.
4. Se recomienda realizar la limpieza de su producto diariamente.
Visite nuestra página www.helvexusa.com
/ Enrosque
Apply plumber´s tape
around the threads.
Coloque teflón en las
cuerdas.
1/2" allen wrench (not included)
llave allen 1/2" (no incluida)
/ Solución
2

Publicidad

loading