Kalorik CYM 42873 Manual Del Usuario página 5

Maquina de hacer s'mores y derretir chocolate 2-en-1
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Fax +1 305 430 9692
BEFORE THE FIRST USE
Remov e all packaging from the appliance.
Place on a dry, flat, lev el, and heat-resistant surface and close to
an electric socket.
For proper v entilation provide at least 4-6 in (10-15 cm) of space
abov e and around the appliance.
Make sure the top cov er is in place and that the dial is set to "0".
Plug into a w all outlet.
Turn the knob to select the S'mores function. Then, let the
appliance heat up for approximately 10 minutes, w ithout using
food. This w ill allow the 2-in-1 S'mores maker to burn off any dust
that may hav e accumulated during assembly.
After 10 minutes, set the dial back to "0" and unplug the
appliance. Let the appliance cool dow n completely.
S'MORES MAKING
1. Fill the compartments of the food tray w ith crackers, biscuits,
marshmallow s, chocolate or other food.
2. Turn the sw itch on the front of the appliance to the "S'mores"
setting. The pow er indicator (3) should light up. We recommend
preheating the appliance for at least 5 to 10 minutes for best
results.
Note: After a w hile, the heating element and the cov er might glow
red hot.
3. Prepare cracker sandwiches with a chocolate bar between 2
crackers / biscuits.
4. Pick a marshmallow using one of the forks provided, a fondue
fork, or a long w ooden stick for example.
5. Holding the fork by the handle, place the marshmallow abov e
the heater, taking care to not touch the stainless steel cover.
6. Rotate frequently until the marshmallow gets brow n and starts to
melt.
7. When the marshmallow gets golden brow n and starts to sw ell,
place it on the chocolate bar and place a cracker on top. The
"sandw ich" created is a perfect s'more. Enjoy!
8. Once you are finished using the s'mores maker, turn the control
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
Print only what is inside the frame.
5
Assembly page 5/32
CYM 42873 – 120501

Publicidad

Tabla de contenido
loading

Tabla de contenido