Philips Norelco Spectra 8 Serie Manual Del Usuario página 18

ENGLISH
18
C
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C
◗ The set will only fit into the Razor Head
C
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Norelco Razor Cleaner, model RC1776, or
rubbing alcohol) and then lubricated with
Norelco Razor Lubricant, model AL80, or one
5 Separate the cutter from the comb and
rinse clean under hot water.
6 Replace the set back into the Razor Head
Assembly so that the 'wings' on the comb
fit within the brackets located towards the
center of the assembly.
Assembly if the 'wings' are between the
brackets. Make sure that the two pointy edges
of the head fit exactly into the recesses.
7 Repeat the process for the other two sets
of cutters and combs.
8 Replace the retaining frame.
9 Press down and turn wheel clockwise until
it locks into place.
10 Place the Razor Head Assembly back on
razor.