Double-Insulated Appliances; General Operation - sunjoe MJ-HVR12E Manual Del Operador

Double-Insulated Appliances

In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means are
provided on a double-insulated appliance, nor should a means
for grounding be added to the appliance. Servicing a double-
insulated appliance requires extreme care and knowledge
of the system, and should be performed only by qualified
service personnel at an authorized Snow Joe
dealer. Replacement parts for a double-insulated appliance
must be identical to the parts they replace. A double-insulated
appliance is marked with the words "Double Insulation" or
"Double Insulated." The symbol
may also be marked on the appliance.
DOUBLE-INSULATED: GROUNDING NOT
REQUIRED. WHEN SERVICING, USE ONLY
IDENTICAL REPLACEMENT PARTS.
This electric hover blade grass cutter is double-insulated,
eliminating the need for a separate grounding system. Use
only identical replacement parts. Read the instructions before
servicing double-insulated appliances. Use this hover blade
grass cutter only as described in this manual.
IMPORTANT!
Safety Instructions for Hover Blade
Grass Cutters

General Operation

• Read, understand, and follow all instructions on the
machine and in the manual(s) before starting.
• Do not put hands or feet near or under the machine.
Always stay clear of the discharge opening.
• Only responsible adults who are familiar with the
instructions should be allowed to operate this machine.
• Clear the work area of foreign objects such as rocks,
wire, toys, and other miscellaneous articles, which could
be picked up and thrown by the blades. Stay behind the
handle when the engine (motor) is running.
• Make sure that the work area is clear of bystanders before
starting the machine. Stop the machine if anyone enters
the area.
• Do not operate the machine while barefoot or while
wearing sandals. Always wear substantial footwear.
• Always look down and behind before and while moving
backward with the grass cutter.
• Never direct discharged material toward anyone. Avoid
discharging material against a wall or other obstruction.
+ Sun Joe
® ®
(square within a square)
• Never leave a running machine unattended.
• Stop the engine (motor) and wait until the blades come to
a complete stop before cleaning the machine, changing
accessories, and performing any other maintenance tasks.
• Operate the machine only in daylight or in good
artificial light.
• Do not operate the machine when you are tired or under
the influence of alcohol or drugs.
• Never operate the hover blade grass cutter in wet grass.
Always be sure of your footing; walk, never run, with the
hover blade grass cutter.
• If the machine should start to vibrate abnormally, stop
the engine (motor) and immediately check the machine
to ascertain the cause. Vibration is generally a signal of
trouble.
• Keep blades sharp.
• Keep hands and feet away from the cutting area.
• Always wear eye protection when operating the machine.
• Objects thrown by the hover blade grass cutter blade can
cause severe injuries. The work area should always be
carefully examined and cleared of all objects prior to each
cutting.
• Only use identical replacement blades.
Slope Operation
Slopes are major factors related to slip and fall accidents,
which can result in severe injury. Operation on all slopes
requires extra caution. If you feel uneasy on a slope, do not
mow it.
• Cut across the face of slopes; never cut slopes following
an up and down traverse. Exercise extreme caution when
changing direction on a slope.
• Watch for holes, ruts, bumps, rocks, or other hidden
objects. These may cause an unexpected slip or fall.
• Do not cut on wet grass or excessively steep slopes.
Poor footing could cause a slip and fall accident.
• Do not mow near drop offs, ditches, or embankments.
You could lose your footing or balance.
3