Hardware Installation - Nvidia QUADRO P6000 Guia De Inicio Rapido

03

HARDWARE INSTALLATION

1
Remove the current graphics driver installed on the host system.
•
Go to Start\Control Panel\Programs and Features
•
Remove the current graphics driver.
2
Power down your system.
3
Unplug the power cord from the AC power source.
4
Remove the side panel from your system to gain access to the
motherboard.
5
Remove the existing graphics card if present. If a retention bar is holding
the card in place, remove the screw securing the card.
OR, If there is no existing graphics card, remove the access
covers from the primary x16 PCI slot.
EN
Note: Reference your specific computer documents for instructions
on accessing the motherboard in your computer.
Note: The NVIDIA Quadro GP100, P6000, P5000, M6000 24GB, and
M5000 are dual-slot cards and will require two (2) adjacent slots.
The NVIDIA Quadro P4000, M4000, P2000, M2000, K2200, P1000,
K1200, P620, P600, K620, P400, and K420 are single slot cards
and will only require a single (1) slot.
Remove one slot cover for the PCI x16 slot if
you are installing the Quadro P4000, M4000,
P2000, M2000, K2200, P1000, K1200, P620,
P600, K620, P400, or K420.
For the Quadro GP100, P6000, P5000, M6000
24GB, and M5000 graphics cards, remove two
adjacent slot covers.