Descargar Imprimir esta página

Use & Care / Wood Care Guide; Care And Maintenance - Jennings H-24 Guía De Uso Y Cuidado

Publicidad

USE & CARE
WARNINGS:
THIS PRODUCT DESIGNED FOR A MAXIMUM CAPACITY OF 400 POUNDS.
NOTE: Save assembly instruction sheet for future reference.
OIL-BASED PAINTED WOOD CARE GUIDE
PLEASE READ THIS INFORMATION CAREFULLY - IT WILL HELP YOU TO MAINTAIN YOUR FURNITURE
This furniture has been made from seasoned wood and has already been factory primed and finished
with an oil-based paint. With proper maintenance, it will give you years of enjoyable service. Wood
is a natural material and its appearance will change when exposed to the elements; surface splits and
checking may appear, particularly on the end grain and to a lesser extent on the surface within a few
weeks if left exposed to the elements. The furniture is designed with this in mind to remain strong and
durable. If left exposed to the weather, your furniture will fade in color. The exact color will depend on
the environment; for example, less fading will occur if the furniture is placed in a shady location under
a tree. To help preserve the color, cover the furniture with a garden furniture cover when not in use.
Wood expands and contracts with changes in relative humidity. To prevent over drying and excessive
cracking, do not store in a heated place.

CARE AND MAINTENANCE

1.
We recommend cleaning the surface of dirt, bird droppings, tree sap, grease. etc. Scrub
with a cloth or soft brush using a mild household cleaner, dish or laundry detergent.
2.
Rinse thoroughly.
3.
Allow to dry completely and retighten all hardware.
REFINSHING
Based on exposure to the elements the finish may need to be restored. Proceed as follows:
1.
Cover the floor area with a suitable liquid resistant ground sheet to contain dust, dirt or spills.
2.
Use suitable protective clothing, i.e., rubber gloves, apron, safety glasses, dust mask, etc.
3.
Check and retighten all furniture hardware
4.
Remove any finish that has become loose or cracked by using a scraper or wire brush.
DO NOT USE STEEL WOOL as the fine particles may result in dark rusty blotching.
5.
In a well-ventilated area or outdoors, lightly sand using 100-200 grit sand paper.
6.
Remove any dust by wiping with a damp cloth.
7.
Allow item to dry completely.
8.
Use an oil-based primer on any bare wood spots.
9.
Brush or spray on new finish using the manufacturer's instructions – using an oil-based paint
available at any paint retailer.
© 2018 Jack-Post Corporation
04
H-24 / H-25
10/18

Publicidad

loading

Este manual también es adecuado para:

H-25